|
Model
V8 Flotect protects equipment
from damage caused by inadequate flow of coolant or lubricant, warns
and controls when flow is too high. SPDT snap switch can turn electrical
devices and alarms on or off with either increasing or decreasing
flow rates. Simple, reliable design uses an external magnet to activate
switch which is fully protected inside leak-proof body. Both body
and vane are made from chemically resistant polyphenylene sulfide.
Trimmable vane has molded graduations for 1- to 6-inch pipes. See
chart for aproximate flows.
To
Order Specify: Model V8
PHYSICAL
DATA
Maximum Temperature: 212°F (100°C)
Maximum Pressure: 150 psig (10.3 bar)
Process Connection: 1" NPTM
Switch Type: SPDT snap acting
Electrical Rating: 5A @ 125/250 VAC
Wire Leads: 18 AWGx18" (45.7 cm)
Overall Length: 9.375 in. (23.8 cm)
Switch Body: Polyphenylene sulfide (PPS)
Wetted Materials: Polyphenylene sulfide, ceramic 8 magnet,
316SS
Vane: Field trimmable
Installation: Install with index arrow pointing in direction
of flow
Weight: 4.5 ounces (128 grams)
|
