| |
Compact
and low cost Model V10
is perfect for flow control in smaller pipe sizes at higher system
pressures. Unique patented switch adjustment enables quick changes
between N.O. and N.C. - just loosen two screws and slide the reed
switch to your choice of switch actions. Tighten screws and it's
complete in seconds! Solid metal bodies enable operation at high
system pressures of 1000 psig for brass units (69 bar) or 2000 psig
for stainless steel (138 bar). Vane is specially formed for maximum
strength; has removable laminated trim template showing where to
cut for water or air flows in six pipe sizes from 1/2" to 2". Index
arrow on side of body indicates correct flow direction.
To
Order Specify: Model V10 (brass body) or Model V10SS (stainless
steel body)
PHYSICAL
DATA
Temperature Limit: 200°F (93°C) maximum
Max. Pressure: Brass, 1000 psig (69 bar); St. steel, 2000
psig (138 bar)
Piping Connection: 1/2" NPT male
Switch: Hermetically sealed single pole, single throw reed
switch. Field adjustable between normally open and normally closed.
Electrical Ratings: 1.5 A @ 24 VDC resistive, 0.001 A @ 200
VDC resistive, 0.5 A @ 120 VAC.
Wire: 22 AWGx18 inches (460 mm) long
Switch Body: Choice of standard brass or optional 303 stainless
steel.
Reed Switch Housing: Polypropylene
Vane: 301 stainless steel, 7/16" wide by .020" thick (11
x.51 mm)
Wetted Materials: 301, 302 and 316 stainless steel, ceramic
8 magnet, brass or optional 303 stainless steel body.
Installation: Install with index arrow pointing in direction
of flow.
Weight: 41/2 ounces (128 grams).
Overall Length: 5.25 inches (133 mm).
|
